On Wed, Sep 2, 2009 at 4:32 PM, Trooz<trooz@roadrunner.com> wrote: > Bentley makes no distinction in the alignment specs between a van and a > Westy. Is that correct? Pages 44.2 and 44.3a of the Bentley list alignment specs according to weight. One set for empty (passenger van) another for half full, and another for fully loaded. A Westy is at least half loaded, and that's what I tried to align my van to when it had the stock suspension. As Dennis notes, bushing wear makes things difficult. I have been several times when the van could not be aligned to the specs because it was at the limit of the adjustment range. My van now has all new ball joints and bushings, new taller/stiffer-than-stock springs, and cutting board shims to level the body. In this condition, I have it aligned to the empty specs. If I were working with stock springs, I would at least try to level the body to adjust for "westy lean" and any excessive sagging in the rear.
-- Michael Snow 1982 Westfalia 1.9TD http://slowmachine82.blogspot.com/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.