Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2009, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 4 Sep 2009 13:17:43 -0700
Reply-To:     Rocket J Squirrel <camping.elliott@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rocket J Squirrel <camping.elliott@GMAIL.COM>
Subject:      Re: Only 13V from Alternator
In-Reply-To:  <2f18aa9f0909041016w6605ecarb9d60c34feb87d8e@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I know what Jeff is saying here, but I have to respectfully disagree.

As I understand it, the voltage regulator in the alternator does not know the battery state of charge. State of charge cannot be determined by measuring battery terminal voltage under charge.

It can be determined with a hydrometer, or it can be derived pretty well by measuring how much current flows into the battery when a charging voltage is applied. But the regulator in our Vanagons has no hydrometer to use, nor any way to measure the current flowing into the battery. All the regulator does for a living is keep the voltage at the output of the alternator set to a pre-determined voltage.

13V seems low.

Steve, you said you measured the output of the alternator and got 13V. Was that right at the B+ terminal on the alternator, or somewhere downstream?

-- Mike "Rocket J Squirrel" Elliott 84 Westfalia: Mellow Yellow ("The Electrical Banana") 74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano Bend, OR KG6RCR

On 9/4/2009 10:16 AM VW Doka wrote:

> Steve, > > Depending on the charge state of your battery, 13V is perfectly fine. > If you're recharging at night, your battery will require very little > "topping off" after starting the engine. > > Cheers, > > Jeff > > > > On Fri, Sep 4, 2009 at 12:37 PM, Steve Williams<sbw@sbw.org> wrote: >> I've known for awhile that the batteries aren't getting charged while >> I drive. The ProMariner has been saving me: It charges the batteries >> each night while I'm parked. >> >> But I just measured the alternator output at idle and at 2,000 rpm: >> 13 volts. My understanding is that it should be 14.2-14.4 volts. >> >> So, is it pretty easy to replace just the regulator on the >> road? Somebody point me to a how-to? (It's mounted on the alternator, >> right?) >> >> Or should I bite the bullet and just get a whole alternator with the >> integrated regulator? >> >> I'm planning to drive some remote stretches on the way back to >> California, and I don't want to get stuck. >> >> http://twitter.com/sbwsty >> >> Thanks. >> >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.