Date:         Sun, 6 Sep 2009 15:05:47 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: OFFER: re blinking temp gauges
Comments: To: mark drillock <mdrillock@cox.net>
In-Reply-To:  <4AA3F491.20005@cox.net>
Content-Type: text/plain; charset="us-ascii"; format=flowed

Dear Mark,
At 01:42 PM 9/6/2009, mark drillock wrote:
>I have found that I could open the gauge by drilling only one rivet
>and pivoting the face on the other rivet. The one I left in was the
>one closest to the hot end of the scale.

Cool, thanks.  Did it make things more delicate dealing with the
needle?  I can't quite visualize the construction, been 7-8 years
since I did one.  Oh, that's right -- is the movement mounted on the
face?  I seem to recall so.

Yours,
David

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.