Date:         Sat, 5 Sep 2009 22:49:14 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Long Brake Line Installation Questions
Comments: To: neil N <musomuso@GMAIL.COM>
In-Reply-To:  <c4e7c5f90909051631o7608a9f7o20a05bafbf3df483@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"

Brake lines should never be covered by anything except paint. If covered
they can't be inspected. All they original clamps are still available at the
dealer and they are not that expensive. Small dabs of silicone or other
glues can also be used to isolate and secure brake lines.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
neil N
Sent: Saturday, September 05, 2009 7:31 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Long Brake Line Installation Questions

On 9/5/09, Bob Stevens <mtbiker62@gmail.com> wrote:
> Neil,Why not use some black silicone sealant between the insulating fuel
> line and the brake line?
> That will eliminate anything from migrating into that space.
>
> bob
>




Hmmm.... interesting idea.

Thanks. Will give it some thought.

I really should suss out some of those Vanagon brake line holding
clips. VM Autohaus (usual vendor) didn't have any.Neither did my
FLAPS.

Neil.

--
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engine
s