Hi Jeff, Count yourself lucky, mine was hacked off by a previous owner. It would really help me out if someone could verify which wires on the harness go to which wires on the 3-wire sensor. One helpful hint I have implemented is to run an independent ground to the O2 sensor; the exhaust system itself is not the best conductor. Greg Quoting Jeff Lincoln <magikvw@GMAIL.COM>: > Hello everyone - > > Would anyone happen to have the yellow connector that connects the wirning > harness to the O2 sensor? I know I could patch things together without it > but I'd prefer I had the actual end. > > I need the part that is on the end of the wiring harness wires - mine got > melted during the big overheat. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.