Date:         Sun, 13 Sep 2009 17:40:22 -0400
Reply-To:     pdooley <psdooley@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         pdooley <psdooley@VERIZON.NET>
Subject:      Re: Coolant hose replacement
Comments: To: Robert Fisher <refisher@MCHSI.COM>
In-Reply-To:  <000001ca34b5$15ea1df0$41be59d0$@com>
Content-type: text/plain; charset=us-ascii

Robert, was that hose in the pics too large in diameter for the application?
I have replaced a couple "molded"$$ hoses on various VAG products with
shorter sections and metal tees, never experienced this problem.


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Robert Fisher
Sent: Sunday, September 13, 2009 4:59 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Coolant hose replacement

I did something very similar on my '87 back when, and I recall when I
mentioned it on the list Dennis warned me that cutting the hose like that
might lead to deformation later. When I put it on it looked much like your
hose there, much to my surprise less than 5000 miles later it looked like
this:

http://picasaweb.google.com/garciasghostvw/BadHose#