At 11:59 AM 9/10/2009, Jeff Lincoln wrote: >Greg - Yes knowing which wire is which would be a big help as well. The >independent ground is a good idea. Well, the actual sensor lead is obvious. For the heater wires, Bentley says for example white and brown for '87, red/yellow and brown for '90 -- obviously the brown is ground in each case. But how they're connected to the sensor leads makes no difference -- the heater isn't grounded to the sensor internally exactly in order to keep the ground paths separate. Am I misunderstanding what you need? Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.