Date:         Tue, 8 Sep 2009 22:36:55 -0400
Reply-To:     pdooley <psdooley@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         pdooley <psdooley@VERIZON.NET>
Subject:      Re: OK, OK, new topic
Comments: To: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
In-Reply-To:  <020f01ca30f1$ce0005c0$6401a8c0@PROSPERITY>
Content-type: text/plain; charset=us-ascii

Hence the reason I have mentioned a few times in the past about fabbing up
some brackets and mounting standard extruded aluminum fuel rails.

This would eliminate the fire hazard and give you unlimited options and
great prices for fuel injectors.

Unfortunately the amount of work involved will shelf this idea until the
factory rails get old enough to fail at a high enough rate to warrant
action.

Are the factory rails available new?


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Scott Daniel - Turbovans
Sent: Tuesday, September 08, 2009 10:04 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: OK, OK, new topic

I must be lucky then, as I've never seen one of those caps rusted in the
slightest way.
So their purpose is to direct fire, when they fall off from rusting,
forward, rather than aftward ?
Very clever.