Date:         Thu, 10 Sep 2009 20:24:27 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: O2 Sensor wire connection (wiring harness end - 2.1)
Comments: To: Jeff Lincoln <magikvw@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

I have 2.1 wiring harnesses.
I don't recall that the 02 sensor connector is yellow though,
but I most likely can supply a connector of the right type.
I might not want to raid a fully intact harness, but I have lots of that
stuff, and save it all.
Scott
www.turbovans.

----- Original Message -----
From: "Jeff Lincoln" <magikvw@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, September 10, 2009 7:58 AM
Subject: O2 Sensor wire connection (wiring harness end - 2.1)


> Hello everyone -
>
> Would anyone happen to have the yellow connector that connects the wirning
> harness to the O2 sensor? I know I could patch things together without it
> but I'd prefer I had the actual end.
>
> I need the part that is on the end of the wiring harness wires - mine got
> melted during the big overheat.
>
> --
> Thanks,
>
> Jeff
> '90 Carat (Grover)
> '86 (We call this one Parts)
> '78 Bus (Melissa) Patty's Bus