Date:         Tue, 15 Sep 2009 08:45:08 -0500
Reply-To:     Tom Hargrave <thargrav@HIWAAY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Hargrave <thargrav@HIWAAY.NET>
Subject:      Re: fuel hose crimping tool
In-Reply-To:  <118601ca3608$86bde2b0$9439a810$@net>
Content-Type: text/plain; charset="us-ascii"

Sorry, here's a better link. The last one wrapped in the email.

http://tinyurl.com/rxu45d

And like Mike S mentioned, nail nippers or a pair of diagonal cutters work
great.

If you but a set of crimpers off eBay, make sure they are the real thing &
not a knockoff made in India. There is nothing wrong with the ones made in
India, you just aren't getting what you pay for at $20.00 each - we sell
them when we can get them for less than $10.00 each.

Thanks,
Tom Hargrave
256-656-1924

Our Web Sites:
www.kegkits.com
www.stir-plate.com
www.andyshotsauce.com


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
Tom Hargrave
Sent: Tuesday, September 15, 2009 8:29 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: fuel hose crimping tool

Mark,

Do you mean this tool?
http://www.kegkits.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=1099&
Category_Code=OCLAMP


I'm not trying to push my business but we sell this & the Oetiker clamps.

Thanks,
Tom Hargrave
256-656-1924

Our Web Sites:
www.kegkits.com
www.stir-plate.com
www.andyshotsauce.com


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
Mark
Sent: Tuesday, September 15, 2009 7:50 AM
To: vanagon@GERRY.VANAGON.COM
Subject: fuel hose crimping tool

anyone know of a good source for a tool to crimp those fuel hoses?  I'm
finding tools that cost $$ - thought I'd see if there's a cheaper
alternative.  I'm thinking really dull nail cutters, or maybe tile nippers??

thanks for any insights!

Mark

--
Mark
1990 Westy (2.1 - manual)