The quick answer is "NO". And here's why: Lug nut & log bolt torque values are based on threads lubricated with light machine oil. And once torqued to the correct range, the friction between the threads & between the face of the fastener and the wheel along with the tension in the bolt shaft hold it in place. Add anti-seize to the formula and you change the rules! My Uncle who was a mechanic in Western NY State, used to put anti-seize on all of his lug nuts because rust & corrosion was such an issue around Buffalo. Then the right rear wheel came off his 63 Avanti while on the interstate & he switched from anti-seize to a light coating of grease to stop the corrosion. Thanks, Tom Hargrave 256-656-1924 Our Web Sites: www.kegkits.com www.stir-plate.com www.andyshotsauce.com
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of eric luebbers Sent: Sunday, September 27, 2009 10:50 AM To: vanagon@GERRY.VANAGON.COM Subject: anti-seize Quik question can I or should I use anti-seize on lug nuts? Eric |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.