Here is a photo that shows exactly what Rico is up against. http://images.thesamba.com/vw/gallery/pix/530766.jpg Mark
Rico Dagastino wrote: > My clutch was not fully disengaging and I checked the adjustment of the > mechanism under the dash. I was never able to get the clearance between the > push rod and the clutch master come anywhere near the maximum of .5 mm > allowed as per the Bentley manual. I removed the clutch pedal and found the > pin which holds the clevis to the clutch pedal was worn where it contacts the > pedal to less than half of its original diameter. The hole in the pedal > was worn into an oblong shape where its length was twice its diameter. I > have a good pin from a junked Vanagon and tomorrow I am going to take the > clutch pedal to a machine shop to have the hole welded and rebored to the > original diameter. I suppose one repair to the clutch pedal in 294,000 miles > isn't so bad. > > Rico Dagastino > Memphis, TN > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.