But Make sure you screw those bolts back in NOT TOO TIGHT or you will shear them off and its a pain to get it fixed. Don't ask me how I know. Michael in San Antonio 91GL AT 'Gringo' 73 Beetle
On Thu, Sep 24, 2009 at 2:41 PM, Roger Sisler <rogersisler2000@yahoo.com>wrote: > There is a 10mm bolt that holds each bank of injectors to the head. Remove > this bolt and the injectors will pull right out and still be hooked up to > the fuel lines.Crank your engine and look to see if they are spraying fuel. > Make sure the little rubber seal donuts are still in place when > reinstalling > them EZ to do all this. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.