Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2009, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 28 Sep 2009 11:47:34 -0700
Reply-To:     Loren Busch <starwagen@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Loren Busch <starwagen@GMAIL.COM>
Subject:      Re: No High Beams
Comments: To: mark drillock <mdrillock@cox.net>
In-Reply-To:  <4AC0FB58.9090604@cox.net>
Content-Type: text/plain; charset=UTF-8

Mark Drillock got it, right on the button. Both fuses 9 and 10 were blown. I guess those little 10 amp fuses don't like the bigger lamps I have in both units. And since I drive at night very seldom they could have been out for some time.

Thanks for all the responses. For those of you that talked about the 'no lights, some lights if I hold up the high/low beam stalk' I've BTDT some years back, a bad light switch on the dash. New (old) switch and a set of relays and that hasn't come up again.

And for those that asked, holding up the lever produced nothing, no lights. Has low beams but neither high beams.

On Mon, Sep 28, 2009 at 11:07 AM, mark drillock <mdrillock@cox.net> wrote:

> Loren, offhand the more likely explanation is that both fuse 9 and 10 are > blown. What happens to the headlights when you hold the lever in the up > position? > > Mark > > > Loren Busch wrote: > >> Quick question before I dive into this, someone might save me some time >> and >> trouble. Plus the weather is about to go to hell here and I have to work >> outside, no garage. >> I noticed that my headlights wern't working right the other night. I >> appears that when I pull up on the lever for high beams I'm getting >> nothing, >> all four ('90 Westy) lights out, not even the little blue light on the >> dash. Click it again and I have the low beams. >> I have a relay kit in place and it's worked fine for several years. >> The info I have indicates that there are separate fuses for right and left >> high beams, I should be able to find those and check them. But I find it >> unlikely that both fuses would go at once. >> So, two questions. First, is there a SINGLE fuse or relay for the high >> beams, one that would put all four lights out? >> And second (and just troubleshooting in my head) how likely is it that >> it's >> just the switch on the steering column? >> >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.