Date: Sun, 27 Sep 2009 12:36:21 -0500
Reply-To: Tom Hargrave <thargrav@HIWAAY.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Tom Hargrave <thargrav@HIWAAY.NET>
Subject: Re: anti-seize
In-Reply-To: <71d9cdf90909271023g2b25998fne576ae4f4de0f74c@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"
I mentioned tension stored in the bolt shaft in my previous post.
Bolt stretch & friction work together to keep the lug nuts on. Bolt stretch
by itself acts like pre-load to keep the wheel tight against the hub.
Thanks,
Tom Hargrave
256-656-1924
Our Web Sites:
www.kegkits.com
www.stir-plate.com
www.andyshotsauce.com
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
Jake de Villiers
Sent: Sunday, September 27, 2009 12:24 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: anti-seize
I'll save you a seat by the fire Courtney! =)
I've been using lube - first grease, then anti-seize on my wheel nuts/bolts
for 38 years and I haven't had one come off yet.
I think maybe folks don't understand that its not friction but bolt stretch
that causes the clamping force...
Seeya, Jake
On Sun, Sep 27, 2009 at 10:01 AM, Courtney Hook <courtneyhook@shaw.ca>wrote:
> Well the consensus in no. Having said that; I've been doing it since 1974
> when I got my first VW Bug, and have never had any trouble. I put
sparkplug
> anti-seize on my sparkplugs; you can buy it as a stick. I also don't use a
> torque wrench; I use my educated arm. I know I'm going to hell.
> Courtney
>
> ----- Original Message -----
> From: "Roger Whittaker" <rogerwhitt1@GMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Sunday, September 27, 2009 9:38 AM
> Subject: Re: anti-seize
>
>
> dear nuts
>> i always apply a little bit of grease to the inside of the nut before i
>> spin
>> it on
>> i have not been in the habit of anti-seize ... i mean just regular grease
>> or some wheel bearing grease ...
>> just a finger dab inserted inside the nut from the wheel side of the nut
>> ...
>> then later zoom off they come ..
>> i have never had a wheel lug nut come off ever ...
>> my personal rule is to tighten to feel then
>> after i set the wheels back down to tighten once more just enough to make
>> a
>> squeak ..
>> or if you have a tourque wrench tighten to spec...
>> one word of caution ...
>> i was taught when i worked in a tire shop to tighten in a star pattern
>> instead of clockwise or anti clock wise
>> so as not to unduly upset the brakes or something ...
>> i do not know if this is true as such but i have always done this
>> religiously
>> ans so far no whells came off and no brake failure after wheel R & R
>> yours
>>
>> On Sun, Sep 27, 2009 at 8:50 AM, eric luebbers <a91syncro@yahoo.com>
>> wrote:
>>
>> Quik question can I or should I use anti-seize on lug nuts?
>>>
>>> Eric
>>>
>>>
>>>
>>>
>>>
>>
>> --
>> roger w
>> From Proverbs:
>> Under three things the earth trembles, under four it cannot bear up: a
>> servant who becomes king ...
>> ----------------------------------------------------------
>> Explore printed work at: http://www.prliving.ca/
>> View the growing list of video work at:
>> http://revver.com/find/video/?query=LastonLastof&search_on=owners
>> and ... older work at
>> http://video.google.com/videoplay?docid=-7135104650374818257
>> http://video.google.com/videoplay?docid=3259745150182742364
>>
>
--
Jake
1984 Vanagon GL
1986 Westy Weekender "Dixie"
Crescent Beach, BC
www.thebassspa.com
www.crescentbeachguitar.com
http://subyjake.googlepages.com/mydixiedarlin%27