|
Great work Ken .... now, please do the headlight adjusters! ;-) Bob Stevens '87 Syncro Westy On Wed, Sep 30, 2009 at 8:12 AM, Ken Wilford <kenwilfy@comcast.net> wrote: > I had posted that we were working on reproducing the early 80-82 AC and > Diesel Vanagon rear shift linkage guide pins. These have been NLA for > almost 10 years now. The original run is done! We have reproduced them > out of steel and they are superior to the originals. The OE ones had a > plastic piece on the end that would hold the guide pin bushing in it. > Over time the plastic goes bad and disintegrates. Our new units are all > steel so no more trouble prone plastic. We are selling these units for > $110 each and we also have new shifter boots and guide bushings > available as well. Time to rebuild that rear shift linkage if you have > an 80-82 Vanagon. You can see a picture of the new linkage piece here: > http://www.vanagain.com/images/251711181.jpg > > It is part number 251711181 in our web store. Let's keep these vans > going down the road! > > Ken Wilford > John 3:16 > www.vanagain.com > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.
