At 10:34 PM 9/28/2009, David Beierl wrote... >>Perhaps simply removing the old cap will allow proper operation, >>except for that power-on indication. > >Actually I believe that removing the cap will force blinking forever >-- the reason it fails to stop is that internal and external leakage >prevent the cap from ever charging enough to trigger the >shutoff. I don't follow your logic. If charging the cap turns off the blinking, then changing to a 0 pF cap with 0 leakage (i.e. removing the cap) should cause the circuit to charge instantly, and stay charged. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.