Date:         Tue, 29 Sep 2009 19:52:03 -0400
Reply-To:     Roger VanTill <motelvw@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger VanTill <motelvw@GMAIL.COM>
Subject:      Re: CVJ gaskets;
In-Reply-To:  <c4e7c5f90909291139j2518851bgd9b34c09c6ae0ce5@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Just pulled mine off and noticed a lot of grease in the arms. Joints were a
bit on the dry side, so I assume it leaks out of that joint. Looks like a PO
put silicone on one side on install. Didn't seem to help although the CV was
stuck on pretty good.

On Tue, Sep 29, 2009 at 2:39 PM, neil N <musomuso@gmail.com> wrote:

> On Tue, Sep 29, 2009 at 9:29 AM, John C... <jcarp2001@gmail.com> wrote:
> > Hi All
> > What's the consensus on using gaskets on the CV's?
> > Both ends; both sides, Syncro front outers?
> > All of them I have  opened up never had them.
> > So, really curious if anyone's using them! :o)
> > Thanks,
> > John C...
> >
>
>
> I checked the archives and found a post.
>
> http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind9710&L=vanagon&P=R30582
>
> Response says no gasket needed.
>
> Another post
>
> http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind0404B&L=vanagon&P=R3966
>
> refers to this part (not sure if correct part. URL didn't seem current)
>
> http://tinyurl.com/yebo239
>
> I've noticed fresh grease on area around each outboard CV's at inside
> of my trailing arm. These are "new" 30K+ KM's CV's self installed CV's
> that function fine otherwise. Can't say if grease from CV's or ?
> (wheel bearings?)
>
>
> Now I'm curious too.
>
> Neil.
>
> --
> Neil Nicholson '81 VanaJetta 2.0 "Jaco"
>
> http://tubaneil.googlepages.com/
>
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
>