Hi all. This is for a 2.1 Vanagon style Walker Quiet Flow muffler on my Vanagon w/Jetta engine. pic (~100kb): Hole/cracks likely due to engine vibrations with previous muffler mount design. (DV type mount now) I will be welding it today. Haven't welded on a muffler before. Pretty sure I have the muffler oriented correctly, but do the Vanagon mufflers have drain holes? IIRC, my old Volvo muffler had a drain hole for moisture. Don't want to weld it shut if it's not supposed to be. Thanks! Neil. -- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.