A few weeks ago I did my seams and surrounding three inches, at the typical rust spot where the camper stuff is welded in on the drivers side. I ran out of time after applying primer/sealer and thought thats ok to wait a while at this stage....... now we had two days of solid rain, and I have micro bubbles under the primer about an inch away from the seam, and worse, something slightly rustcolored at a few seam spots. Obviously I have to redo a few things, but I was wondering whether my assumption that primer sealer is weathertight was wrong, or if I did the whole thing wrong...... thanks florian |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.