Jeff, check the ends of the sensor wires. On my motor the one behind the pulley has a 90 degree female end. The one under the pushrod tubes is straight with a rubber boot. I'll look for those other wires when it's light out. On Mon, Oct 12, 2009 at 10:39 PM, Jeff Lincoln <magikvw@gmail.com> wrote: > Ok gang - I had a friend helping me with Grover, and while I love the guy > he > didn't label everything he took apart (while I was at work). So I'm a bit > stumped. Is this the wiring for my oil pressure sensors? If so which is > .3bar and which is the .9bar? > http://picasaweb.google.com/magikvw/TheUglyTruth#5391905839891007874 > > > Now this one I don't think is anything but I'm still curious. This wiring > goes to the license plate light - now I don't recall cutting any wires - so > where do you suspect these two cut wires went? I am guessing they didn't go > to anything during my time owning this bus. > http://picasaweb.google.com/magikvw/TheUglyTruth#5391905849181268978 > > Thanks ahead of time for any help anyone can lend here. > > -- > Thanks, > > Jeff > '90 Carat (Grover) > '86 (We call this one Parts) > '78 Bus (Melissa) Patty's Bus > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.