Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (October 2009, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 13 Oct 2009 06:51:06 -0400
Reply-To:     Jeff Lincoln <magikvw@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff Lincoln <magikvw@GMAIL.COM>
Subject:      Re: Wiring questions
Comments: To: Roger VanTill <motelvw@gmail.com>
In-Reply-To:  <152e292b0910130314wc75662ds83c966d52ff9dce9@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

That's the thing Roger - the wires to the sensors themselves are not hooked to anything the wires on the connector int he picture lead back to the wiring harness.

I have the straight connector witht he rubber boot already on the sensor by the push rod tubes but I am not sure where to connect the wire end - I'll have to make a wire connector for the sensor behind the pulley - I just need to know where it connects up top.

I'm fairly sure this is where those things hook up but I want to be sure.

On Tue, Oct 13, 2009 at 6:14 AM, Roger VanTill <motelvw@gmail.com> wrote:

> Jeff, check the ends of the sensor wires. On my motor the one behind the > pulley has a 90 degree female end. The one under the pushrod tubes is > straight with a rubber boot. I'll look for those other wires when it's > light > out. > > > -- Thanks,

Jeff '90 Carat (Grover) '86 (We call this one Parts) '78 Bus (Melissa) Patty's Bus


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.