Date:         Tue, 13 Oct 2009 06:14:13 -0400
Reply-To:     Roger VanTill <motelvw@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger VanTill <motelvw@GMAIL.COM>
Subject:      Re: Wiring questions
In-Reply-To:  <c803c1a70910121939j279a8479w7367481697444e35@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Jeff, check the ends of the sensor wires. On my motor the one behind the
pulley has a 90 degree female end. The one under the pushrod tubes is
straight with a rubber boot. I'll look for those other wires when it's light
out.

On Mon, Oct 12, 2009 at 10:39 PM, Jeff Lincoln <magikvw@gmail.com> wrote:

> Ok gang - I had a friend helping me with Grover, and while I love the guy
> he
> didn't label everything he took apart (while I was at work). So I'm a bit
> stumped. Is this the wiring for my oil pressure sensors? If so which is
> .3bar and which is the .9bar?
> http://picasaweb.google.com/magikvw/TheUglyTruth#5391905839891007874
>
>
> Now this one I don't think is anything but I'm still curious. This wiring
> goes to the license plate light - now I don't recall cutting any wires - so
> where do you suspect these two cut wires went? I am guessing they didn't go
> to anything during my time owning this bus.
> http://picasaweb.google.com/magikvw/TheUglyTruth#5391905849181268978
>
> Thanks ahead of time for any help anyone can lend here.
>
> --
> Thanks,
>
> Jeff
> '90 Carat (Grover)
> '86 (We call this one Parts)
> '78 Bus (Melissa) Patty's Bus
>