On Thu, Oct 15, 2009 at 8:31 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote: > The "low" coolant indicator is extremely important especially in the event > of a sudden major coolant loss. The gauge sensor relies on water passing by > it. No coolant, on over temp indication until you get steam. The Jetta > engine is a little better than the water boxer as at least the senor is on > or near the head. > > Dennis >
The way I had installed the aftermarket temp sensor was bugging me, so I removed it and reconnected my aftermarket gauge to the Jetta temp sensor. It now reads slightly higher. Since I have an '85 cluster, and possibly the low coolant control module, thought I might kill two birds and by swapping in those parts. But.... Can anyone tell me what white "number" is on the low coolant warning module for the 1.9 WBX? Googling PN's on the ones I have and comparing the pin numbers to Bentley shows I likely I don't have it. But just in case... Neil.
-- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.