taken care of by squeezing the female part of the connector. Thanks for the suggestion. Dave Mc
On Mon, Oct 19, 2009 at 4:12 PM, Stephen Grisanti wrote: > If you can't reach the female portion of the connector you might bend > the male portion so that it curves like the tines of a fork to improve > contact. > > Stephen > > --- On Mon, 10/19/09, Dave Mcneely wrote: > > > From: Dave Mcneely Subject: loose blade conncectors > To: vanagon@GERRY.VANAGON.COM > Date: Monday, October 19, 2009, 2:47 PM > > > Can the push in blade be made to fit more tightly to the receptacle? > How? This contributes to an intermittent fluctuation in the oil > pressure reading at my gauge. The blade wiggles around. Thanks ahead > of time, Dave Mc |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.