Hi all - Seems like a basic question, but I can't seem to find the answer in the archives or Bentley. How the heck do I take my fuel injectors out? After some knuckle scrapes, elbow knocks and little cussing, I've got the metal bands off the fuel hoses (save whatever is securing the little one inch hose directly to the injector) - now I'm ready to pull out the injectors so I can work on those little hoses and replace the seals. But I've never done it before, I can't find a simple write up for how to go about it. Thanks again for the advice! oh - and because of all of you - I am indeed replacing all my 7mm fuel line! Mark -- Mark 1990 Westy (2.1 - manual) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.