Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2009, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 21 Oct 2009 11:26:44 -0400
Reply-To:     greg@POTTSFAMILY.CA
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Greg Potts <greg@POTTSFAMILY.CA>
Subject:      Re: Thirsty motor with low power to 2,500 rpms. What's up?
Comments: To: Greg S <sorkilmo@GMAIL.COM>
In-Reply-To:  <1b1c168b0910210507y11f17291x912a1782394bba88@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes"; format="flowed"

Hi Greg,

If the O2 sensor is feeding back bad data to the engine it's going to mess things up pretty bad. In my case I can tell from the fuel pressure readings that for some reason the ECU does not fire the injectors as much as the engine comes off idle. This may be an AFM issue or throttle position sensor or elsewhere. I think the O2 sensor was reporting a rich condition and the ECU was leaning it out.

Frank realigned my throttle position sensor a few weeks back, so I don't think it's a mechanical problem in my case. In your case I'd start there. I get the same response with 2 different AFMs and ECUs as well, so (in my case) I don't think they are at fault either. At this point I am leaning to a fault in the O2 sensor wiring or the throttle position sensor wiring. When I get a chance I will inspect the TPS wiring and see what happens.

It's nice to get the performance back, now I just need to work on getting more than 200 miles per tank of fuel. The last motor gave me more than 250.

Greg

Quoting Greg S <sorkilmo@GMAIL.COM>:

> Wow. I just unplugged my O2 sensor and have had the same transformation. > Wish I had figured this out months ago - but better late than never (thanks > Greg).This still leaves me wondering something about the O2 sensor though. I > understand that when the engine is cold the sensor should be in open loop, > effectively disabling any input from the O2 sensor. Why then would my engine > run poorly (laggy performance under 2500rpm) when it was cold (as well as > after warming up)? > > Cheers, > Greg S. > 87' Hardtop Wolfsberg > Ottawa ON > > On Sun, Oct 18, 2009 at 8:17 PM, Greg Potts <greg@pottsfamily.ca> wrote: > >> Hi Chris, >> >> >> Then I tried unplugging the O2 sensor; It was like I bought a whole new >> engine. >> >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.