The Propex inlet is BSPT, not metric. Fittings can be found here: http://shop.hoseandfittings.com/catalog/Fitting/Brass/Pipe_-_British.html and http://mcmaster.com Of course, there is no need for any of these unless you are installing in such a way that a different fitting is required. I always keep extras of the stock Propex fittings here, in 1/4", 5/16", and 3/8" tubing sizes. The exhaust pipe is the unpainted, stainless steel pipe. Karl www.westyventures.com www.propexusa.com On Fri, 30 Oct 2009 08:34:36 -0400, W Monk <billmonk@GMAIL.COM> wrote: >Karl and Frank, >Question about the british pipe threads on the fitting that goes into the >heater. I know the end going into the heater are metric ,but are the threads >on the end with the compression fitting also metric? I made sure not mix up >any of the parts ,but still curious. I also have >a question about which pipe is the exhaust on the bottom of the heater. Is >it the painted or the silver pipe thats the exhaust? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.