Date:         Fri, 30 Oct 2009 08:52:28 -0600
Reply-To:     Bob Stevens <mtbiker62@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob Stevens <mtbiker62@GMAIL.COM>
Subject:      Re: Suburban Type Furnace Install;
Comments: To: W Monk <billmonk@gmail.com>
In-Reply-To:  <410029d70910300534j19865a0em3cd435f375b21f4@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Hey Bill,
Get another tank and put it under the psgr slider. You'll appreciate the
extra
fuel and longer "stays" AWAY from the propane dealer. I ran mine throughout
the night on a 10 day trip last winter and after getting home filled it and
it
took almost an entire tank (2.3 gallons), sooooooo. I just have to connect
my two tanks now as the aux tank is dedicated to the Propex only.

Bob Stevens

On Fri, Oct 30, 2009 at 6:34 AM, W Monk <billmonk@gmail.com> wrote:

> Karl and Frank,
> Question about the british pipe threads on the fitting that goes into the
> heater. I know the end going into the heater are metric ,but are the
> threads
> on the end with the compression fitting also metric? I made sure not mix up
> any of the parts ,but still curious. I also have
> a question about which pipe is the exhaust on the bottom of the heater. Is
> it the painted or the silver pipe thats the exhaust? I am in the process of
> moving mine from under the rear seat to the same place Frank  has his. I no
> longer  have the computer under the rear seat over there so may move things
> around even more. This project may involve moving my propane tank under the
> pass side. I am trying to balance the weight out a little bit better in
> my westy.
>
> Bill
>
>
>