Date: Tue, 3 Nov 2009 09:18:11 -0500
Reply-To: Chris S <szpejankowski@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Chris S <szpejankowski@GMAIL.COM>
Subject: Re: Engine carrier question
In-Reply-To: <BAY132-DS6F69B5D036162D8B3E7FEA0B30@phx.gbl>
Content-Type: text/plain; charset=UTF-8
I am using an 84 carrier on an 89. Only difference that I could
discern is the center bolt hole for heat shield.
2009/11/2, Dennis Haynes <d23haynes57@hotmail.com>:
> If I am reading the ETKA correctly the carrier is the same for the air
> cooled and 1.9L engines. (025-199-203-A) 86 and later (025-199-302-D), and
> Syncros (025-199-203-E), get a different number.
>
> Dennis
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Jamie Foust
> Sent: Monday, November 02, 2009 9:24 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Engine carrier question
>
> Is an air cooled and a water cooled engine carrier (cradle) interchangeable?
> All of the mounting points appear to line up the same. The reason I ask is
> that I have both, but my water cooled carrier is bent from a PO mounting a
> hitch receiver to the two bolt holes for the center two rubber mounts. This
> has pulled the carrier towards the rear of the vehicle, bending the cradle
> causing the rubber mounts to have a severe angle when mounted. I will be
> using a non-stock exhaust, other than that being an issue, what are the
> gotcha's?
>
> Jamie
>
>
>
> ________________________________
>
> Please consider the environment before printing this email
>
> This message and its attachments contains confidential information and is
> intended only for the highly valued individual customer or team member
> named. Please notify the Baker Group sender immediately by e-mail or
> telephone if you have received this e-mail by mistake and delete this e-mail
> from your system. Please do not distribute or copy this e-mail.
> Because e-mail transmission cannot be guaranteed to be secure or error-free
> as information could be intercepted, corrupted, lost, destroyed, arrive late
> or incomplete, or contain viruses, Baker Group cannot accept liability for
> the contents of this message. If verification is required please request a
> hard-copy version. Thank you for the opportunity to work with you!
>
--
Wysłane z mojego urządzenia przenośnego
Chris S.
Disclaimer: "Death and serious injury may occur"
|