|
Battery voltage! Controlled by contact on starter solenoid and the "thermal time switch". Very simple circuit but polarity of the two wires on the TTS is extremely important. Is only used for cold starting under ~40f. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of zzyzx Sent: Friday, November 06, 2009 7:15 AM To: vanagon@GERRY.VANAGON.COM Subject: 1982 Westy air cooled fuel injection cold start valve voltage Is there any info on the voltage a cold start valve operates at on a 1982 Westy air cooled fuel injection system? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.