Date:         Mon, 2 Nov 2009 18:28:53 -0500
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Engine carrier question
Comments: To: Jamie Foust <foustj@THEBAKERGROUP.COM>
In-Reply-To:  <B692F4A1543C7F4FA7BF6D4AE0273B6A16C2B92F76@BakerMB1.thebakergroup.com>
Content-Type: text/plain; charset="us-ascii"

If I am reading the ETKA correctly the carrier is the same for the air
cooled and 1.9L engines. (025-199-203-A) 86 and later (025-199-302-D), and
Syncros (025-199-203-E), get a different number.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Jamie Foust
Sent: Monday, November 02, 2009 9:24 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Engine carrier question

Is an air cooled and a water cooled engine carrier (cradle) interchangeable?
All of the mounting points appear to line up the same. The reason I ask is
that I have both, but my water cooled carrier is bent from a PO mounting a
hitch receiver to the two bolt holes for the center two rubber mounts. This
has pulled the carrier towards the rear of the vehicle, bending the cradle
causing the rubber mounts to have a severe angle when mounted. I will be
using a non-stock exhaust, other than that being an issue, what are the
gotcha's?

Jamie



  ________________________________

Please consider the environment before printing this email

This message and its attachments contains confidential information and is
intended only for the highly valued individual customer or team member
named. Please notify the Baker Group sender immediately by e-mail or
telephone if you have received this e-mail by mistake and delete this e-mail
from your system. Please do not distribute or copy this e-mail.
Because e-mail transmission cannot be guaranteed to be secure or error-free
as information could be intercepted, corrupted, lost, destroyed, arrive late
or incomplete, or contain viruses, Baker Group cannot accept liability for
the contents of this message. If verification is required please request a
hard-copy version. Thank you for the opportunity to work with you!