Date:         Tue, 3 Nov 2009 22:26:30 EST
Reply-To:     JordanVw@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JordanVw@AOL.COM
Subject:      Easy way to mount vanagon jumpseats into your westy or pass van
Comments: To: billmonk@GMAIL.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 11/3/2009 3:22:04 P.M. Eastern Standard Time,
billmonk@GMAIL.COM writes:

He used  a two large allen bolts and then bolted them to the
floor.
He then  drilled the head out to accept the legs on the bottom of the seat.
He said  he got the bolts at the local hardware store.


i agree. this is the easiest safest way to install mounts in the floor for
the jumpseats.
. i used to cut the floor mounts off donor carats and then weld them to the
 floor but this is way easier...

chris

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.