Hi Group, I'm conspiring to set up both batteries (standard lead acid starting) with Anderson Power Pole connectors mounted just outside the battery boxes. They'll tap into the batteries with short lengths of marine grade 6 AWG wire. With this setup, I'll be able to make a jumper to connect the two batteries for a jump start if needed and a set of jumper cables with the Power Pole connectors at one end and the standard alligators at the other end for road rescues of other vehicles. It occurs to me that I have no clue how much current is drawn by a starter motor drawing juice thru a dead battery jumped to a good battery. My Power Poles are rated at 50 amps and the wire is good for 37 amps. Will the connectors and the wire do the trick or will I have a meltdown or worse? Anyone?
John Meeks '91 Multivan Northern Michigan Vanagon Rescue Squad http://www.vanagonauts.com/Vanagon_Rescue_Squad74.htm Radio Call:KC8ZFN |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.