Date:         Fri, 13 Nov 2009 22:26:17 -0800
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: FRIDAY OT - Headlight aimage
Comments: To: Robert Fisher <refisher@mchsi.com>
In-Reply-To:  <005801ca64c6$cc3d6bc0$64b84340$@com>
Content-Type: text/plain; charset=ISO-8859-1

What he said, only with chalk and I don't care if its brick or not.  =)

I've used the semi-underground parking at the Peninsula Village Safeway -
poured concrete.

On Fri, Nov 13, 2009 at 5:07 PM, Robert Fisher <refisher@mchsi.com> wrote:

> Why would you need a machine for that? I used some duct tape and a brick
> wall.
>
> Cya,
> Robert
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Dave Mcneely
> Sent: Friday, November 13, 2009 4:50 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: FRIDAY OT - Headlight aimage
>
> I no longer live in Texas.  When I did, the headlight aiming involved a
> machine that was set in front of each headlamp, and the light was
> adjusted to a target (crosshairs) in the machine.  Thought that was how
> it was done everywhere.  David
>
>
> On Fri, Nov 13, 2009 at 5:37 PM, Chris S wrote:
>
> > Next time you're at a car dealer or a car service center please ask
> > them
> > about their procedures to aim headlights.  You may be surprised what
> > you
> > hear.
> >
> > Anyone willing to post their findings, especially if you live in a
> > state
> > that does not require inspections?
> >
> > --
> > Chris S.
> > Disclaimer: "Death and serious injury may occur"
>



--
Jake

1984 Vanagon GL
1986 Westy Weekender "Dixie"

Crescent Beach, BC

www.thebassspa.com
www.crescentbeachguitar.com
http://subyjake.googlepages.com/mydixiedarlin%27