Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2009, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 16 Nov 2009 20:24:57 -0500
Reply-To:     mordo <helmut.blong@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mordo <helmut.blong@GMAIL.COM>
Subject:      Re: How I filled 1.9 with coolant,
              was; Roadside BREAKDOWN...Water Pump Belt
Comments: To: Zolly <zolo@foxinternet.net>
In-Reply-To:  <BBF01C72B53C4BB3AA53CA6700619C95@ZoltanPC>
Content-Type: text/plain; charset=ISO-8859-1

2.1l and the Libby Bong is not conceptually different then your method. It employs a length of PVC pipe with a rubber reducing coupler attached to the mouth of the reservoir. Found here: http://tinyurl.com/yhb4juq

I find it curious that I've never seen mention of that bleeder. It seems like it would be important.

m

On Mon, Nov 16, 2009 at 3:54 PM, Zolly <zolo@foxinternet.net> wrote:

> That bleeder is ok if it works. Most of the time it is blocked by dirt and > won't let anything out. I am not familiar with the Libby method. What is > the difference from the one I explained? > Is your car 1.9 or 2.1 liter? > Zoltan > > ----- Original Message ----- From: "mordo" <helmut.blong@GMAIL.COM> > > To: <vanagon@GERRY.VANAGON.COM> > Sent: Monday, November 16, 2009 11:33 AM > Subject: How I filled 1.9 with coolant, was; Roadside BREAKDOWN...Water > Pump Belt > > > > Having had my own cooling system woes recently, I have read and awful lot >> of >> material on bleeding the system both here and at theSamba.com. What I have >> never read in any place except the Bentley is the direction to open and >> close the engine compartment bleeder screw. Why is this so? Bentley 19.16, >> Fig. 6 clearly shows the direction to use the bleeder in the engine >> compartment. >> >> I figured it must not matter much if no one mentions it. But, in fact, >> whilst using the Libby Bong method, I remembered that I hadn't opened that >> bleeder. I did so and when I did, I got a satisfying burble and the system >> took in considerably more coolant. So, is everyone bleeding at this screw >> or >> not? Is the 1.9 different in this respect? I've never read of it in either >> account of coolant bleeding, 1.9 or 2.1. >> >> Cheers, >> -- >> mordo >> 1990 Carat >> >> >> >> -- >> mordo >> 1990 Carat >> > > > > -------------------------------------------------------------------------------- > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.425 / Virus Database: 270.14.67/2506 - Release Date: 11/16/09 > 07:43:00 > >

-- mordo 1990 Carat


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.