Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2009, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 15 Nov 2009 18:50:39 -0800
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Insulation on Engine Compartment? Side Steps?
Comments: To: Pat Sloan <pmsloan@shaw.ca>
In-Reply-To:  <B4337FD2E59E4F7DA90695D063711516@pat43d5bf70c66>
Content-Type: text/plain; charset=ISO-8859-1

On Sun, Nov 15, 2009 at 2:52 PM, Pat Sloan <pmsloan@shaw.ca> wrote:

> It's an 82 Westy with a 1.8 > litre 1987 Jetta engine transplant. > > 1.      Engine Noise - When I drove the van from Tacoma to Vancouver, BC, > the engine sounded great. Very smooth, no strange noises coming from > anywhere. BUT it was incredibly loud. If I'd had a passenger, it would have > been difficult to carry on a conversation. Not comfortable. My old 73 Westy > never sounded like this. The tach says no problems there. Are engine > compartments supposed to be sound-insulated? Has anyone done a > re-insulation? What is the preferred material, etc? Thnx.

AFAIK, there's only insulation on the engine lid for all years. Is it present? If not, installing stock insulation should be sufficient. IIRC, yours is a diesel with a gas engine swap. If so, the engine lid should be stock. (uncut/modified like mine) Can't see why insulation would be missing (if that's the case)

Though I'm using a modified engine lid for my inline VW engine swap, the stock insulation keeps engine/exhaust quiet.

Pic of my lid showing what the stock insulation looks like for an '81 air cooled. Likely similar for other model years. It's modified, but note the rings holding insulation in place on RH side. Those are the stock rings.

http://sites.google.com/site/tubaneil2/TubbedLid.jpg

To my eye, the insulation looks quite similar to the stuff that was on the front hood of my '81 diesel Rabbit. If no Vanagon insulation at the bone yard, maybe insulation from another VW?

(btw, check out Vancouver CL. There's been lots more Vanagon parts there lately)

Neil.

-- Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.