Hi, Bill. There's a very small flat head screw (ETKA calls it a pin) that holds the handle and it's facing downward, but you obviously know that. For that I went to Sears and bought a universal joint screwdriver with multiple bits (# 47476) , and it works with a little patience. Don't loose that pin, brother, because it is expensive. Hope to have been of help. Héctor 1990 Carat 'Ursula'
On Sun, Nov 22, 2009 at 1:04 AM, W Monk <billmonk@gmail.com> wrote: > On my 87 Westy the sliding window on the slider door,the latch is loose to > the glass. Looking at an exploded drawing it looks > like there is two screws I could tighten up under the black part. How do > you > get the black part of the latch off? I looked in the > Bentley and there was nothing that I could find. > > Bill > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.