As far as I remember, it was not difficult at all. The cleaning was most of the work. I had to empty both chambers of their kind of oil, then stand it up and take off the gearbox side. There is a big O ring and then the two back-to-back seals. I also changed the two drive shaft seals the same time. Zoltan ----- Original Message ----- From: "Robert Johnson" <robertj90@COMCAST.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, November 22, 2009 6:39 PM Subject: Replacing seal between automatic & final
> Good evening all, > > Does anyone have any experience with changing the seal > > between the automatic transmission and the final drive? > > Or can lead me to this info? > > How hard of a job is it? > > Thanks!
--------------------------------------------------------------------------------
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.425 / Virus Database: 270.14.77/2520 - Release Date: 11/22/09 19:40:00 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.