Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2009, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 23 Nov 2009 07:49:08 -0800
Reply-To:     Trooz <trooz@ROADRUNNER.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Trooz <trooz@ROADRUNNER.COM>
Subject:      Re: Auto Trans Rumbling
In-Reply-To:  <BAY132-DS7AA483BA0175EC5022A7CA09F0@phx.gbl>
Content-Type: text/plain; charset="us-ascii"

Dennis is spot on as usual. I had this happen to me several years ago. I was convinced that my AT was self-destructing. Admittedly, I have old ears, but somehow I was convinced that the noise was coming from my tranny.

Turned out to be the water pump.

Now I have hearing aids.

Bob Trousdale '90 Westy

> -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] > On Behalf Of Dennis Haynes > Sent: Sunday, November 22, 2009 5:06 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Auto Trans Rumbling > > Is the engine maintaining good idle speed when in drive or > reverse? The only > parts that should be moving when stopped is the torque > converter and pump. > If either are damaged or misaligned they will soon let you > know. Look for > other sources of noise such as the mounts or a bad water pump > or alternator. > > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] > On Behalf Of > Jeff Lincoln > Sent: Saturday, November 21, 2009 9:00 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Auto Trans Rumbling > > OK gang - > > I've noticed that when in drive but stopped at a light or > stop sign things > get very "rumbly". Low rumbling and vibration. It does not do this in > Neutral or park. > > What gives? My brother says torque converter - but as much as > I love him > he's a dork so I am asking you. > > Things have been fine. So did I line something up wrong when > I mated the new > engine to the trans? Low fluid (I haven't checked yet but > will) - the fluid > shouldn't be low - I changed the filter and seal on the pan > when while we > had it out. > > Ok, I anxiously await your wisdom and reports of impending doom!!!! > > -- > Thanks, > > Jeff > '90 Carat (Grover) > '86 (We call this one Parts) > '78 Bus (Melissa) Patty's Bus > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.425 / Virus Database: 270.14.76/2517 - Release > Date: 11/21/09 07:47:00 >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.