That feedback ignores the basic design of the wiper mount hardness-material, vs the wiper arm softness material. It's designed to allow for this problem by designing the arm attachment to fail and NOT ruin the wiper motor or related mounting mechanism. I don't know of any wiper arms that have a hard enough mounting material to do any damage to the motor mounting point. It it happens it's rare. bob On Mon, Dec 7, 2009 at 11:02 PM, Matt Thyer <matt_thyer@hotmail.com> wrote: > Sounds like you might have stripped the teeth from the motor where the > wiper > arm is affixed. To completely diagnose this problem, which is common in > very cold climates, you'll need to remove the wiper arm from the motor > mount. It's probably a nut under the shorter side of the wiper arm that > needs to be removed although I'd have to see it to be sure. Remove the arm > and see what's left. If you have lost the teeth on the mount then you're > at > least looking at removing the dash to get to the motor to replace the mount > or the whole motor depending. > > HTH, > > Matt Thyer > Ellensburg, WA > 1983 Vanagon Diesel L 'Zeno' > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.