Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2009, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 18 Dec 2009 18:09:38 -0600
Reply-To:     Tom Hargrave <thargrav@HIWAAY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Hargrave <thargrav@HIWAAY.NET>
Subject:      Re: Rubber...Our best friend...Our worst enemy
Comments: To: Richard A Jones <jones@COLORADO.EDU>
In-Reply-To:  <4B2C0F12.3070008@colorado.edu>
Content-Type: text/plain; charset="us-ascii"

Richard,

This is a classic example of a "plan to fail" approach that most of us fall into.

I also used to carry around parts most likely to fail. I'd keep spare belts, coolant hoses, ignition parts, a coil, etc, etc until I realized one day that I was planning to fail instead of maintaining so that my machines don't fail.

So, I went a complete different way. I routinely inspect wear items like brake pads & such. I change out my brake fluid every 6 months. I replace belts & hoses when they start to show wear or at 2 year intervals, whichever come first. I find out what hard parts are likely to fail with age and I go ahead and replace them at reasonable intervals.

I no longer carry around tool boxes or spare parts - I don't need them. I'll even drive my 77 Corvette across country without tools - I don't need them.

I've done this for 15 years now and yes I've had breakdowns - 4 of them. But all 4 were catastrophic failures that I could not fix on the side of the road anyways.

Oh, and I drive 40K - 50K miles a year.

Another way to look at this is - airplanes don't carry around spare parts......

Thanks, Tom Hargrave 256-656-1924

Our Web Sites: www.kegkits.com www.stir-plate.com www.andyshotsauce.com

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of Richard A Jones Sent: Friday, December 18, 2009 5:24 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Rubber...Our best friend...Our worst enemy

> btw......the hoses that wear the most are the ones that get the hottest - > usually ones on top of the engine.

Soon after I got my '87 Syncro in 2001, I asked my mechanic about replacing hoses. He has many years of experience with many Vanagons, and he commented that there were four hoses that were the most common to fail. I put spares of those four on board and drove for years until a hose started spewing coolant at Syncro Safari '08. It was one of those four.

I'd look up which four and give part numbers but my Syncro is at the mechanic's getting a bunch of new hoses--connected to a Subaru 2.5 engine. ;-)

Richard


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.