YES! I don't have the part number, but NAPA has that EXACT hose. From outlet on the front of the head to the heater hose. I just looked at the hoses hanging on the wall and there it was. The perfect hose. I might have posted the part number on the Diesel-Vanagon list. Be worth looking in the archives. Got one about three or four years ago. And it was a stocking part. Visit your local NAPA. Jim
On Dec 24, 2009, at 5:38 PM, Alan Felder wrote: > Hi all - hoping everyone is having a great holiday. I have a > coolant leak > issue today that I hope I have solved, but in case i didn't, I will > need to > find at a FLAPS, a hose to fit the heater feed outlet at the head > of my 82 > naturally aspirated 1.6. Ideally, this hose would fit the outlet at > the > head, then change to standard 5/8" heater hose, and be about two > feet long > so it will reach the splice over the tranny, where I installed new > heater > hose but left the old feed line at the head. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.