Changing your brake Master Cylinder. One of the 'gotchas' in that job is how to get the sometimes stuck brake fluid reservoir out of the rubber grommets in the brake cylinder without breaking or cracking the barbs. I did mine today and indeed, the res. was stuck in there pretty well. Tried all manner of pry techniques and BFFI, too. (BFFI= Brute Force and _______ing Ignorance) Then I recalled my handy dandy dandelion garden tool that I usually use for removing the axle nut caps and some times the regular hubcaps. That dorky Wal Mart tool is perfect to slip under the flanges on the fluid res. between the white plastic and the rubber grommets, and pry it up without flexing the 'spigots' and maybe cracking them. Got the job done in about 2.5hrs including bleeding with my Motive power bleeder...another good tool. Don Hanson |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.