Actually the OBD2 wiring harnesses are easier to modify for Vanagon use than the OBD1 2.2 harnesses (ask anyone who has done it) 2.2 non-interference is a plus.... but as long as you change the timing belt at the required interval you should not have a problem with 2.5's, and Subaru sells a "California" timing belt good for 110k miles so you don't have to do it very often. Finally "low mileage" JDM engines are a bit of a scam...many of the ones sold by the importers have many more miles (or problems) than stated...and there is no way to verify true mileage since you cannot "carfax" a JDM engine. I've seen "30k mile" JDM engines that burn oil like they have 200k on them....bottom line, YMMV/buyer beware with JDM engines... |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.