Date:         Sat, 2 Jan 2010 16:31:46 -0700
Reply-To:     Geo & Kathleen Hahn <ahwahnee@CYBERTRAILS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Geo & Kathleen Hahn <ahwahnee@CYBERTRAILS.COM>
Subject:      Adjusting Rear Camber
Content-Type: text/plain; charset="iso-8859-1"

It appears to my eye that the rear camber on my '84 Westy needs adjustment.

The Bentley procedure seems simple, perhaps too simple?  Just pull off that plastic cap from the big nut, loosen the nut, pry the trailing arm by inserting a big screwdriver in the slot, tighten the nut and go.

Assume here that I am crafty enough to measure camber both before and after.

I couldn't find any reference to this in the archives... suggesting that it is either very easy or seldom done.  Any gotchas I should know about?  Thanks for any help.

Geo

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.