Date: Sun, 3 Jan 2010 08:43:58 -0800
Reply-To: Matt Thyer <matt_thyer@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Matt Thyer <matt_thyer@HOTMAIL.COM>
Subject: Re: Adjusting Rear Camber
In-Reply-To: <152e292b1001030432g67e57daby8f6c781cdbf968e0@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"
Wow, that's awesome! Thanks Roger
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Roger VanTill
Sent: Sunday, January 03, 2010 4:33 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Adjusting Rear Camber
Here's a nice DIY tutorial from the Samba.
http://www.thesamba.com/vw/forum/viewtopic.php?t=375963&highlight=alignment
On Sat, Jan 2, 2010 at 9:15 PM, Don Hanson <dhanson928@gmail.com> wrote:
> On Sat, Jan 2, 2010 at 5:16 PM, Scott Daniel - Turbovans <
> scottdaniel@turbovans.com> wrote:
>
> > it's easy.
> > see my post just posted.
> >
> > you can check camber, toe, and get a good idea if front castor is
> correct,
> > with a flat level floor, and simple measuring tools and a level.
> > Been doin' it for 30 years at least. And I get 'em to track true,
> > and
> run
> > with nice even tire wear, believe it or not.
> >
> > scott
> >
> >
> >
> > ----- Original Message -----
> > From: "Dave Mcneely" <mcneely4@COX.NET>
> > To: <vanagon@GERRY.VANAGON.COM>
> > Sent: Saturday, January 02, 2010 3:42 PM
> > Subject: Re: Adjusting Rear Camber
> >
> >
> > Well, without alignment equipment, I wouldn't attempt it. How would
> > you
> >> measure the angle? David Mc
> >>
> >>
> >>
>
>
>
> You can use what is called a "Smart Level" that may be a brand name
> for a digital level that are available online or at Home Despot or
> Lowes... I like to put a couple of spacer blocks onto one to measure
> the angle of the wheel rim.rather than trying to use the tire's
> sidewall..
>
> Excellent accruacy to the tenth of a degree. With a little thought,
> you can do a good job with your suspension alignments. I did all my
> own alignments on my P-car racer and won races and set lap records..it
> is not rocket science..Regular tools(strings, levels, tape measures,
> etc) can do the job at least as well as a 'normal' alignment shop and
> all their fancy lazers and computers run by an ..."uninspired?" wage
worker.
>
> That being said, your best indicator of how your alignment really IS
> is your tire wear. If they are wearing evenly without any 'weirdness'
> in the wear pattern your alignment is pretty close to right..
>
> not sure about the Vanagon, but many vehicles need to be 'settled'
> between changes to the alignment settings. If you jack the thing up
> and change something, you should drive it around a little to get the
> suspension back to 'relaxed' before you re-measure your alignment..
>
> Don Hanson
>
>
>
>
> > On Sat, Jan 2, 2010 at 5:31 PM, Geo & Kathleen Hahn wrote:
> >>
> >> It appears to my eye that the rear camber on my '84 Westy needs
> >>> adjustment.
> >>>
> >>> The Bentley procedure seems simple, perhaps too simple? Just pull
> >>> off that plastic cap from the big nut, loosen the nut, pry the
> >>> trailing arm by inserting a big screwdriver in the slot, tighten
> >>> the nut and go.
> >>>
> >>> Assume here that I am crafty enough to measure camber both before
> >>> and after.
> >>>
> >>> I couldn't find any reference to this in the archives...
> >>> suggesting that it is either very easy or seldom done. Any
> >>> gotchas I should know about? Thanks for any help.
> >>>
> >>> Geo
> >>>
> >>
>
|