Date:         Mon, 11 Jan 2010 15:57:45 -0500
Reply-To:     Jonathan Berg <jonbergga@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jonathan Berg <jonbergga@GMAIL.COM>
Subject:      Re: Headlights: SA Conversion Procedure
In-Reply-To:  <4B4B8CD0.2020006@charter.net>
Content-Type: text/plain; charset=ISO-8859-1

I used Jon's write-up when I installed my SA grill last year. Very helpful.

I measured thrice, drilled once, and still broke off a drill bit in
the sheet metal. Never could get that shard out - had to drill an
entirely separate hole. Cut to fit, paint to match. Jeepers, Vanagon
sheet metal is tough.

(a different) Jon
jonbergga@gmail.com
90 Syncro Westy 2.0 ABA -- Milton
Apharetta, GA

On Mon, Jan 11, 2010 at 3:40 PM, John Rodgers <inua@charter.net> wrote:
> Nice write-up. I have a new SA grille to install sometime this month.
> This writeup was most timely.
>
> John Rodgers
> Clayartist and Moldmaker
> 88'GL VW Bus Driver
> Chelsea, AL
> Http://www.moldhaus.com
>
>
>
> Jon Kanas wrote:
>>
>> Good Morning,
>>
>> Considering the recent discussion on headlights, I documented my
>> conversion to the South African configuration on my website.  I hope
>> this might be helpful for those of you considering various alternatives.
>> http://www.qadas.com/~kanas/Vehicles/Syncro/Syncro_Index.html
>>
>> *Best Regards,
>> Jon
>> *
>>
>>>
>>
>>
>