Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (January 2010, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 24 Jan 2010 11:25:34 -0600
Reply-To:     John Rodgers <inua@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@CHARTER.NET>
Subject:      Re: UODATED INFO FW: STRANDED in South Florida - NEED TECH HELP
Comments: To: Mark Drexler <mdrexler@ZING-NET.CA>
In-Reply-To:  <E10FB0D4DB9E4D4E9EE65CDE6E847DB4@IBMDA3234A2E69>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Mark,

Check the vacuum hose from the crankcase vent tower to the AFM. My van rand crappy and I discovered the hose had rotted underneath where one would not see it.

The vacuum hose this applied to the 2.1L - not sure about the 1.9L.

John Rodgers Clayartist and Moldmaker 88'GL VW Bus Driver Chelsea, AL Http://www.moldhaus.com

Mark Drexler wrote: > Hi again. So, I checked a few things. > -idle stabilizer control unit contacts are clean, no moisture > -Idle control stabilizer valve is humming. > -throttle valve switch is NOT working at idle but working at full throttle > -WHEN HARNESS IS REMOVED FROM AIR FLOW SENSOR THE ENGINE IDLES SMOOTHLY. > When the harness is reattached it drops revs 200k, and gets very rough and > stumbles badly when throttle applied. > Does this tell you anything. Can I drive it with the afm unplugged? > > Mark > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Mark Drexler > Sent: Saturday, January 23, 2010 5:31 PM > To: vanagon@GERRY.VANAGON.COM > Subject: STRANDED in South Florida - NEED TECH HELP > > Hi. Help needed. We are stranded at Homestead, Florida, where Hwy 1 heads > into the Keys. > > 91 GL Westy doesn't want to go any further. Started rough this am, but ran > decent most of day once completely warmed up. > > Just completed 1700 trouble free (till now) miles on new fuel injectors, > fuel lines, plug wires, plugs, cap and rotor. Fuel filter has about 2-3k on > it. Checked plugs this am, and they were a brown and dry. > > Now just fueled up, and will start, but spits and burps, and can't get all > cylinders firing on start up. Feels like a lack of fuel delivery to me. > Getting more and more rough on start up last couple of days, actually since > some heavy rains a couple of days ago. > > > > Suggestions on root cause or things I should check please, and does anybody > know any techs around very south florida that I could track down??? > > > > THANKS. > > > > Mark & Mary > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.