Should be easy to do but I need to see the drawing. And if enough interest, I can design a heater control relay board & spec some reasonably priced parts from DigiKey. I did the layout for the PCB shown a little ways down on this web page. http://stir-plate.com/news.htm
Thanks, Tom Hargrave 256-656-1924 Our Web Sites: www.kegkits.com www.stir-plate.com www.andyshotsauce.com
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of John Rodgers Sent: Monday, January 25, 2010 4:58 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: heater fan whine This thread brings to mind having seen somewhere something about using a relay(relays) to reduce the load on the front heater control switch. Anyone have a link showing this??? Thanks John Rodgers Clayartist and Moldmaker 88'GL VW Bus Driver Chelsea, AL Http://www.moldhaus.com
ron johnson wrote: > Quick question - both the front and rear heater blowers whine after 5-10 minutes operation. How difficult is it to lubricate these poor animals? > > thanks, > Ron J. > PDX, OR > '91 Weekender, AT > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.